Grain Bagger D-9

The Grain Bagger D-9 has a filling capacity of 180–250 tons per hour. It is an impeccably engineered machine designed for tractors with a power of 100–160 HP, developed by us to support efficient farming around the world.

more information

Efficient and Uniform Filling of Silage Bags
The D-9 is a low-cost grain bagger equipped with a large hopper capable of receiving grain from transfer trailers. It can also be loaded using telescopic or front loaders. The hopper is designed to make the operator’s job easier and to minimize grain loss during the bagging process. The machine’s construction also ensures uniform filling of the silage bags.

We recommend using two GS 24.5 trailers to ensure smooth, uninterrupted filling. While using a single GS 24.5 trailer can still provide a solid performance of 150–180 tons per hour, the overall process becomes more challenging in terms of logistics and workflow.


Grain Bagger D-9 - Technical data sheet



 Grain Bagger D-9 Specifications 

The machine is equipped with a 2.7 m (9-foot) tunnel, compatible with EURO BAGGING silage bags in lengths of 60, 75, or 90 meters. Using a 60-meter bag, which holds approximately 200 tons of dry grain, you can achieve a storage capacity of around 4,500 tons per hectare. A 75-meter bag holds about 250 tons of dry grain.

When combined with the EM-9 extractor, which allows unloading from both sides of the bag, you can place bag next to bag and achieve a total storage capacity of up to 10,000 tons per hectare.


Our technology is under concept GRAIN SAVER.



Video



show more
show less

Customer Testimonials

  • Lauritz Haar

    Stavanger, Norway
    Switch from round bales to silage in bags

    I chose EURO BAGGING technology because of its low investment cost for storage and because it ensures a consistent fermentation process — unlike round bales, where fermentation differs in every single bale. For bag silaging, you don’t need as much machinery as for round bales — just a silage bagger and 2–3 silage wagons, which also have a lower ground pressure. At the same time, I save time because once the last wagon is processed, I seal the bag with a zip, and the fermentation process is already underway — and I’m done. Laboratory test results confirmed that it is a very stable product with minimal losses. I’m convinced this technology has a strong future in the feed storage segment.

  • Florian Kern

    Schönberg, Germany

    Switch from open storage to silage bags

    Since 2009, we have been using silage bag storage technology. Before that, we pressed large square bales, and grass and corn silage were stored on open ground, which led to significant losses. We started looking for a new storage method to minimize losses, so we bought a used silage bagger of Italian origin. However, we weren't convinced by the design of that machine — its concept and transport were complicated. We needed to move the machine several times a day from one farm to another. In our region, there are many small farms, and we often ensile only small amounts of feed. Typically, we need to move and set up the machine 3–4 times a day.

    The EURO BAGGING EB 310 LG bagger offers a great solution — it doesn't need to be disconnected from the tractor. It is easily set into working position just by reversing. The EB 310 LG has high capacity and achieves a high compaction rate in the bag.

  • NADEC AGRICULTURE

    Saudi Arabia
    Corn silage storage

    We, NADEC AGRICULTURE, are one of the largest farms in Saudi Arabia, storing over 80,000 tons of silage and supplying it to our dairy farms. This storage system appears to be the best solution compared to large silage pits. Bag storage requires much lower investment costs and offers significantly greater flexibility.

    The sealed bags prevent oxygen infiltration. If the bags are properly filled, we can store silage for at least two years with dry matter (DM) losses of less than 8%, which is significantly lower than with other technologies.

    EURO BAGGING is the right partner for us. Not only are they specialists in the field of bagging, but they also provide excellent service with high-quality machines. I would like to highlight the openness and entrepreneurial spirit of Lukáš Jurek and strongly recommend EURO BAGGING to all potential customers.

Interested in our machine or have a question?

Do you have any experience with a similar machine?